A mile of tape… … is easy to pull.
for connection posts
(To connect all the tape raws to your charger)
TIP to install round black Clips (#RCLIPbl) :
#45V Corner Insulator for wooden post
#45V Corner Insulator for wooden post – For a maximum distance of 160 ft between 2 tension posts.
sold with 2 clips and 2 lag bolts.
Third buckle for three way on #BP37
New Spring kit #BP38 for gate
New Spring kit #BP38 for gate : installation of a gate with elasticity
with the same tape as your fence, with the tape of the spool.
Gate handle for tensioner BP32 or BP37
# BP38_ + #BP13A
Gate Handle #BP12A for #9bl block tensioner (tensioner block #9bl is not sold anymore).
Poignée de porte Bi-Polaire #BP12A
I – Measure and draw a mark
Measure and draw a mark for the placement of the middle tape, report the same mark on all posts…
… to install block tensioners and insulators at the same level..
On line posts, secure all insulators with 2 wood screws. Do not insert the thumbscrew yet the tape will be set at the very end of the installation.
II – On the “Control Tower” post
On the Control Tower post, position the HorseGuard Tensioner on the mark and drill in just one lag bolt to hold it in place.